Shop closed from 20th Dec - 2nd Jan, emails and messages will still be answered.
Spearfishing UK

shopping bagBasket

Riffe Power Rubber Bands- Reactive

From: £2.00


Riffe Rubber comes either as Black outer, amber internal, or full amber rubber. The black is dipped, natural latex with UV protection, whilst the amber does not have UV protection. Both rubber styles are reactiveย and punchy.

Please add bands separately to your basket if there is more than one. Calculations can be found in the description below or please contact us to help

Riffe Power Rubber- per cm

Rubber Tip Sanding

Would you like us to sand the tips of your rubber?

Band Rigging Service- Closed Circular

Perfect for open muzzle holes such as Rob Allen, Riffe and Cressi. Will want to use with a finned or smooth notched spear.

Band Rigging Service- Removable Bridle

Perfect for closed off muzzle holes such as Pathos and Salvimar. Will want to use with a finned or smooth notched spear.

Band Rigging Service- Metal Wishbone

Perfect for spears with sharp edged notches that wont take dyneema wishbones.

Band Rigging Service- Roller Bands

We'll add a Rob Allen Easy Load Wishbone to make life easier!

Band Rigging Service- Screw in Rubbers

We'll fit your rubber to screw in adapters! You'll need an articulated wishbone with screw in adapters, if you don't already have one, we would recommend this

In stock, yours in 1-4 days

SKU: Riffe Power Rubber Bands- Reactive Category:

RIFFE Rubber Power Bands for spearguns contain antioxidants for longest life.

The Riffe Speargun rubber is Primeline dipped 100% latex which is the gold standard when it comes to speargun rubber.

This is the most powerful and highest quality rubber on the market, made in the USA, this rubber is what Rob Allen and Sigalsub use for their bands.

This rubber is sold by the cm, if you require a 65cm band, please add 65 units. We are also able to make up the bands for you should you wish. Simply select one of the options above after reading about them below.

Want us to make your speargun band?

When ordering, please choose one of the pre-made band options using the check boxes provided. Here is a description of each option:

  1. Rob Allen dyneema wishbone. This is a closed loop band, common setup for RA, Riffe and Cressi spearguns. As it is a ย dyneema wishbone, it is suitable for finned or bevelled notched spears.
  2. Looped wishbones with removable bridle. These are perfect if you need to undo the bridle to fix it to your speargun. Guns that need this style are brands such as Pathos and Salvimar. These are made with a Dyneema wishbone and therefore suitable for finned or bevelled notched spears.
  3. Metal wishbone โ€“ used to replace screw in rubbers for a sharp spear notch. This is a closed loop band and such suited for branded spearguns such as RA, Riffe and Cressi.
  4. Roller bands are designed for your roller gun. If you have a different configuration than Rob Allen, Pathos or Salvimar roller bands, let us know and weโ€™ll make it for you.
  5. Screw in rubbersโ€“ weโ€™ll insert screw in adapters and tie them off so you can use them with your euro guns. You will need a separate wishbone, you may have one with your old bands. Or if it is unusable or you donโ€™t have one, we would recommend this.

What length rubber do I need?

If you are not sure what length you need for your speargun please feel free to get in touch. However here are the recommended stretch factors and equations to use.

  • Both 14mm & 16mm are suitable for a stretch factors between 280% and 325% – we recommendย around 300-330

Now for the equations:

For Circular Bands

  1. Measure from the furthest notch/shark fin to the start of the muzzle hole
  2. Multiply by 2
  3. Divide by your stretch factor. If you would like 270%, divide by 2.7. If you would like 340%, divide by 3.4
  4. This number will equal number of cm needed.

For Roller Bands

Weโ€™ll make your bands to fit your specific roller, the most common set ups would be; Rob Allen, Pathos or Salvimar style bands. If you have a different configuration to these above, please let us know and weโ€™ll make it for you!

  1. Measure from the furthest notch round the muzzle and back down the length of the gun to where the rubber will sit securely.
  2. Multiply by 2
  3. Divide by your stretch factor. If you would like 270%, divide by 2.7. If you would like 340%, divide by 3.4
  4. This number will equal number of cm needed.

For Screw in Rubbers

Measure from the furthest notch to where the rubbers screw in.

  1. Measure from the furthest notch to where the rubbers screw in.
  2. Multiply by 2
  3. Divide by your stretch factor. If you would like 270%, divide by 2.7. If you would like 340%, divide by 3.4
  4. This number will equal number of cm needed.

Remember that not all gun rubbers are made equally and the same is true for spears. Some spears work better when powered by a specific rubber and visa versa.

Also, be sure not to overpower your spear as this will lead to inaccuracies in your shots. Of course if you are unsure then please get in touch.

Colour

Amber, Black/Amber

Brand

Band Thickness

14mm, 16mm

Rubber Manufacturing Style

Rubber reactivity

Riffe Power Rubber- per cm

Colour

Amber, Black/Amber

Thickness

14mm, 16mm

Brand

Band Rigging Service- Roller Bands

Band Style

Rob Allen Roller Band, Salvimar Roller Band, Pathos Roller Band

Band Rigging Service- Screw in Rubbers

Thread material

Inox, Plastic screw with Inox tip

Band Style

Screw in Rubber (4 Screw Threads), Circular (2 screw threads)